Fujikura 88s Datasheet
Fujikura 88S+ is a new core alignment Fusion splicer with Faster automation feature. The faster automated feature of 88S+ fusion splicer reduces installation times. The New 88S+ has Active Blade Management Technology and Active Fusion Control Technology. The 88S+ fusion splicer automatically identifies the optimum arc discharge parameters in accordance with the ber type. The sheath clamp of the 88S+ fusion splicer is compatible with loose tube fiber. The 88S+ fusion splicer and CT50 ber cleaver are enabled with wireless data connectivity. This capability allows automatic cleaver blade rotation when the splicer judges the blade is worn. Also, the 88S+fusion splicer can connect to two CT50s simultaneously. It has 4.9 inches with touch screen LCD monitor.
- Features:
- Splicing time: 7-9 sec (SM FAST mode).
- Heat time: 13-15 sec (for 60 mm sleeves).
- Core alignment technology.
- Advanced image processing technology.
- Fiber discrimination function.
- The faster automated features.
- Time for opening wind protector is 80% lower comparing to the Fujikura 80S.
- Time for placing fiber into heater is 50% lower comparing to the Fujikura 80S.
- Easy fiber protection sleeve positioning.
- The lid of the carrying case may be used as a work table.
- Plenty of space in the carrying case. There are two drawers for storage, and the work tray can be divided into two separate places.
- The sheath clamp is compatible with loose tube fiber.
- Wireless data connectivity allows automatic cleaver blade rotation when the splicer judges the blade is worn.
- The tool can connect two cleavers simultaneously.
- Blade life management: the device displays the remaining blade life, informs about blade height and position change, and when new blade is required.
- Operation manual is installed into the splicer.
- Battery life increased up to 500 recharge cycles.
- Increased electrode lifetime – up to 5000 splicing cycles with one set.
- 5-inch color TFT touch screen display.
Reviews
There are no reviews yet.