Fujikura 22s Fusion Splicer Splicing Machine (Discontinued)

Specifications

• Applicable fibers Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
• Cladding dia. / Sheath dia. 125 μm / 100μm to 3mm with sheath clamp
• Cleave length 5mm to 16mm
• Splice mode / heating mode Total 100 splice modes / 30 heating modes
• Typical splice loss 0.03dB (SM), 0.01dB (MM), 0.05dB (DS) and 0.05dB (NZDS)
• Measured by cut-back method relevant to ITU-T and IEC standards.
• Splice time / tube heating time Typical 7sec with SM / Typical 30sec with FP-03 (60mm) sleeve
• Splice result storage Last 2000 splices
• Viewing methods / magnification 2 axis 2CMOS camera with 4.73” color LCD. 132X magnification.200X magnification after splicing
• Tension test 1.96 to 2.25N
• Applicable protection sleeve 60mm, 40mm and Fujikura micro sleeves
• No. of splice / heating per battery full charge * 1 Typical 200 cycles with BTR-11
• Electrode life 3000 splices
• Size / weight 120W x 189D x 72H mm / 1140g (including battery)
• Operating condition Altitude : 0 to 3,660m above sea level, Wind : 15m/sec
• Temperature : -10 to 50deg C, Hμmidity : 0 to 95%RH, non-dew
• Other features PC software upgrade / data management
• Resistance features * 2 Shock resistance : 76cm (30inch) bottom surface drop
• Dust resistance : Exposure to dust (0.1 to 500μm dia. Alumina Silicate).
• Rain resistance : H=10mm/hr for 10min